Assaying Furnace

This type of furnaces are suitable for analysis of rare metals and in assaying and other processes aimed at determination of the contents of rare metals in materials. Protection of heating elements and insulation from waste products and vapours using an easy-to-replace ceramic muffle.

    • Max. temperature of 1300°C
    • Double-lined housing made of high-grade stainless steel sections
  • Inner lining made of insulating bricks and a layer of silicate board for low power comsumption and rapid approach of required temp.
    • Closed ceramic muffle avoid contact with heating spirals
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
    • Venting bleeder
    • Draft hood above the door
TypeTmax
°C
Capacity
litre
Muffle dimension
(wxhxd) mm
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
08/1313008260x90x330850x1900x1050 22400290

Chamber Furnace

This type of laboratory furnaces are suitable for various applications in laboratories eg. testing in medical, dental, hygienic, industry, ceramic, Glass-making and etc.

    • Max. temperature of 1200°C
  • Double-lined housing made of high-grade stainless steel sections with ventilation holes for cooling by natural air flow.
    • Resistant fibre module for inner chamber
    • Door collar also made from resistant fibre.
    • High quality heating elements (Kanthal A1)
    • Heating elements embedded in ceramic plates.
    • Exhaust pipe in rear wall
    • Door safety switch
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
16/12128016700x700x790230x200x3503.023060
16/12R128016700x700x790230x200x3505.540070
17/12128017720x700x790250x200x3503.540080
25/121280251050x1440x1700250x250x40011.0400250
40/121280401100x1440x1900290x250x55011.0400320
55/121280551180x1440x1900400x250x55013.0400450
105/1212801051300x1350x1900500x350x60021.0400660
130/1212801301300x1500x2000500x350x75021.0400750
180/1212801801350x1950x2000550x400x80029.0400830
225/12 12802251400x2150x2050600x500x75029.0400920
350/1212803501500x2150x2400700x450x110050.04001100
540/1212805401500x2450x3000600x600x150050.04001540
680/1212806802200x2600x2450900x500x150070.04001620
1000/12128010002100x2750x2850900x600x180070.04001980
1400/12128014002300x2750x32001100x600x210095.04002500

Enamel Firing Furnace

This type of laboratory furnaces are suitable for various applications in laboratories eg. testing in medical, hygienic, ceramic, Glass-making.

    • Max. temperature of 1100°C
  • Double-lined housing made of high-grade stainless steel sections with ventilation holes for cooling by natural air flow.
    • Inner lining made of insulating cellular slab made of mineral fibre.
  • Heating elements are positioned in quartz glass tubes protecting against attack of aggressive element released during firing.
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
05/111100 5170x130x230470x330x4551.823018
09/111100 9.4190x170x290490x370x5152.323023
15/111100 14.4250x170x340550x370x5653.023030

High Temperature Furnaces

This type of high-temperature furnace is designed for a wide range of applications in laboratories and production especially for testing,  analysing, sintering and other purposes

      • Max. temperature of 1600°C and 1700°C
      • Door equipped by the security limited switch
      • Furnace equipped by the cooling fan
      • Optimum temp. uniformity DIN 17052-1
      • KANTHAL SUPER heating elements
      • Thermocouple of the type B, placed at the top of furnace chamber
      • According to CE standard
TypeTmax
°C
Capacity
litre
Outside dim
Wxdxh mm
Inside dim
Wxdxh mm
Power
kW
Voltage
Volt
Weight
kg
02/1616002660x740x680130x135x1503 23090
04/1616004660x740x680130x180x1603.5 230100
02/1717002660x740x680130x135x1503 23090
04/1717004660x740x680130x180x1603.5 230100

Muffle Furnace

This type of muffle furnaces are suitable for various applications eg. testing of different materials by the heat processing, where the emission of harmful gases or matters will not affect the heating coils.

    • Max. temperature of 1200°C
    • Double-lined housing made of high-grade stainless steel sections with rear ventilation
  • Inner lining made of insulating bricks and a layer of silicate board for low power consumption and rapid approach of required temp.
    • Closed ceramic muffle avoid contact with heating spirals
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
    • Observation hole in the door
    • Door safety switch
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
04/12 12004490x540x720170x90x275 3230 43
07/1212007490x540x720170x170x275 323046
11/12120011570x540x720255x165x2553.5230 53

Oven

This type of drying ovens are suitable for various applications eg. Deformation, drying, polymerisation, vulcanisation of materials.

    • Max. temperature of 300°C
  • Double-lined housing made of high-grade stainless steel sections with rear ventilation thus extremely low outer casing temperature
    • Inner lining made of heat-resistant stainless steel
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
    • Door safety switch
TypeTmax
°C
Capacity
litre
Int dimension
(wxhxd) mm
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
60/0330060450x300x4501050x1350x9503 23060
100/03300 100450x500x4501050x1550x10003 230100
250/03300 240800x500x6001400x1550x12004400250
400/03300 380800x800x6001400x1750x12006400350

Tube Furnace

This type of furnaces are suitable for various applications in industry or ceramic laboratories where a very precise temperature distribution and dynamic progress of temperature curve are required. Especially used for material heat treatments, calcinations, softening or material sintering point setting, samples firing , etc.

    • Max. temperature of 1300°C
    • Double-lined housing made of high-grade stainless steel sections
    • Inner lining made of insulating cellular slab made of mineral fibre.
    • Heating elements are positioned in grooves within the mineral fibre
    • Opening of furnace lid using handles upwards
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
TypeTmax
°C
Internal tube
Ø mm
Heating Zone
length mm
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
50/300/13 1300 50300570x310x5103.223075
50/300/13 1300 50500810x310x5105.040085
50/750/13 1300 507501100x310x5108.040085
75/500/13 1300 75500810x400x6006.540085
75/750/13 1300 757501100x400x60010.040085
100/500/13 1300 100500810x450x6507.040085
100/750/13 1300 1007501100x450x65011.540085