Bench Top Furnace

This type of furnaces are suitable for various applications eg. testing of different materials by the heat processing, where the emission of harmful gases or matters will not affect the heating coils.

      • Max. temperature of 1340°C
      • Double-lined housing made of high-grade stainless steel sections with rear ventilation
      • Inner lining made of insulating bricks and a layer of silicate board for low power consumption and rapid approach of required temp.
      • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
      • Observation hole in the door
      • Door safety switch
TypeTmax
°C
Capacity
litre
Int dimension
(wxhxd) mm
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
06/13 13406200x150x2301050x1350x950 1.5 23072
09/13 13409230x170x2301050x1550x10002.0 23073
15/13 134015250x250x2501400x1550x12002.4 23082
30/13 134030310x310x3101400x1750x12003.2 230120

Bogie Hearth

This type of bogie hearth chamber furnace is designed for industrial especially for hardening,  curing, heat treatment, annealing, glass preheating and aftercooling to stress elimination and etc

    • Max. temperature of 900°C and 1260°C
    • Door opening upwards using hydraulics
    • Heating placed on wall surfaces and bogie
    • Optimum temp. uniformity DIN 17052-1
    • Manually controlled ventilation flap
    • Bogie spirals covered with SiC plates
    • According to CE standard
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
800/099008002350x2650x2500900x600x1500324001300
1000/0990010002350x2650x3050900x600x200040 4001500
1500/0990015002450x2500x35001000x600x2500604002300
2000/0990020002250x2900x35001000x800x2500804002800
3000/0990030002650x3250x40001000x1000x30001104003500
5000/0990050002700x4500x40501200x1400x30001304004200
7000/0990070002700x4500x50501200x1400x40001504004900
800/1212608002350x2650x2500900x600x1500404001300
1000/12126010002350x2650x3050900x600x2000604001500
1500/1215002450x2500x35001000x600x2500804002300
2000/12 126020002250x2900x35001000x800x25001104002800
3000/12126030002650x3250x40001000x1000x30001304003600
5000/12126050002700x4500x40501200x1400x30001804004300
7000/12126070002700x4500x50501200x1400x40002504005000

Chamber Furnace

These hardening furnaces are designed for industrial and glass technologies especially for hardening,  annealing, artificial ageing, curing, heat treatment, glass form preheating, metal charges before the armouring under oxidizing atmosphere and etc

    • Max. temperature of 1280°C
    • Internal lining made of refractory concrete
    • Heating on sides and on the bottom
    • Bottom covered with SiC plates
    • High quality heating elements (Kanthal A1)
    • Optimum temp. uniformity DIN 17052-1
    • According to CE standard
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
16/12128016700x700x790230x200x3503.023060
16/12R128016700x700x790230x200x3505.5 40070
17/12128017720x700x790250x200x3503.540080
25/121280251050x1440x1700250x250x40011.0400250
40/121280401100x1440x1900290x250x55011.0400320
55/121280551180x1440x1900400x250x55013.0400450
105/1212801051300x1350x1900500x350x60021.0400660
130/1212801301300x1500x2000500x350x75021.0400750
180/1212801801350x1950x2000550x400x80029.0400830
225/12 12802251400x2150x2050600x500x75029.0400920
350/1212803501500x2150x2400700x450x110050.04001100
540/1212805401500x2450x3000600x600x150050.04001540
680/1212806802200x2600x2450900x500x1500 70.04001620
1000/12128010002100x2750x2850900x600x1800 70.04001980
1400/12128014002300x2750x32001100x600x210095.04002500

Gas Tight Furnaces


This type of furnaces are suitable for heat treatment of materials in controlled atmosphere (argon, nitrogen, forming gas etc) with low gas drain.

    • Max. temperature of 1100°C
    • Overpressure cooling
    • Isolated by insulation fire bricks and micro porous panels
    • Gas tight retort
    • Optimum temperature uniformity in internal chamber space according to DIN 17052-1
    • Manually opened door
    • Heating on side and bottom
    • Engine with extended shaft for internal air circulation of furnace
    • Door isolated by silicon sealing
    • Manually operated protective atmosphere inlet
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
35/111100241400x1450x1300220 x 260 x 45011400400
55/111100301450x1450x1300320 x 200 x 450113400570
130/111100751450x1450x1550450 x 200 x 70021400950
180/1111001101650x1650x1550500 x 340 x 700294001050
350/1111002301800x1750x1850700 x 340 x 1050504001350

Pit Type Furnaces

This type of furnaces are suitable for heat treatment of bulky and heavy charges. These furnaces are used in defined protective atmosphere (argon, nitrogen, forming gas etc) with low gas drain.

    • Max. temperature of 1100°C
    • Electrohydraulically lifted lid isolated by circular silicone sealing
    • Water-cooled sealing
    • Gas tight retort
    • Refractory grid on the bottom
    • Refractory stainless steel circular insert
    • Optimum temperature uniformity in internal chamber space according to DIN 17052-1
    • Vertical air circulation
    • Fan located in the lid
    • Manually controlled atmosphere protection for one (1) type of gas
    • Supply for connection of air pump
    • Thermistor for flange temperature checking and presence of cooling liquid in the retort collar

Extra Accessories

    • Automatic protection atmosphere supply for one (1) or more gases
    • Graphic temperature recorder
    • Batch thermocouple
    • Pressure vacuum gauge
    • Air pump
    • Overpressure cooling with automatic flap on input and output of air cooling
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
2300/6565022602100x3300x24001200 x 20001204003400
500/1111005001600x2400x1800800 x 1000504001650
800/1111008001800x2400x18001000 x 1000704002100
1000/11110010001800x2700x21001000 x 1300904002250
1700/11110017002000x2700x21001200 x 15001204002650

Salt Bath Furnace

This type of furnaces are suitable for quick warming-up of steel parts before hardening without scaling. Appropriate salts may be used also as a hardening media for thermal and isothermal hardening.

    • Max. temperature of 900°C in heating pot
    • Pot suspended by the offset in the inlet of the upper cover
    • Isolated by insulation fire bricks
    • Lid equipped with safety and limit switch
    • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
    • Heating spirals on ceramic tubes
    • Status of heating elements using 3 ammeters

Optional Accessories

    • Charge thermocouple with protection tube
    • Crucible
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
20/11 1100 20950 x 790 x 95021400570