Centerless Grinding

This is a Centreless belt grinding and polishing machine for tubes with diameters of between 20 and 100mm.

      • supplied with an attachment which can be mounted on all belt grinders with a 75x2000mm belt
      • can remain as a belt grinder even when the centreless grinding attachment is mounted
      • not necessary to remove the centreless attachment when using the belt grinder for normal grinding work

Optional Accessories

      • Spark arrester with spigot
      • Dust extraction systems including spark arrester, hoses and bags

Technical Parameters

Model Belt grinder Pipe and tube capacity

(mm)

Drive wheel   (mm) Dimension            LxWxH               (mm) Motor

Hp

Gear Volt Weight     (kg)
75 CG SC 75 Ø6 – 100 50x150x25Ø 105x70x115 0.4 NMRV030 400 80
75 CGX SC 75X Ø6 – 100 50x150x25Ø 105x70x115 0.4 NMRV030 400 90

CNC Cylindrical Grinding

This is a CNC cylindrical grinding machine for universal external and internal grinding and facing operations and incorporate the very latest technology, as well as a complete range of different technical configurations in accordance with the specific applications and requirements of the parts to be ground.

      • direct from drawing programming possibility
      • job rotation axis interpolation for non round shape grinding (c-axis)
      • possibility of grinding different profiles using the profile following cycle
      • easy machine-job set up
      • can choose between FANUC and FAGOR latest generation CNC

Optional Accessories

      • Wheel balance system
      • Positive part stop
      • Hydrostatic guide ways
      • GAP – The wheel spindle power consumption managed GAP device when the wheel touches the part
      • Crash – The power consumption managed anti-collision system CRASH properly, abort the cycle and making the wheel head retract
      • Dressers
      • Internal grinding spindles
      • Clamping devices for tooling
      • Steady rest
      • Multi functional portable hand wheel
    • Cooling equipment

Technical Parameters

Model Grinding wheel diameter

(mm)

Grinding wheel bore (mm) Max. Table Travel

(mm)

Max. tooth Diameter

(mm)

Grinding Motor HP Voltage Weight     (kg)
LC 25-S 150 20 200 250 1 400 275
LC 35-S 150 20 350 300 1 400 550

Saw Grinding

This is an automatic pawl indexing sharpening machine for HSS and segmental circular saw blades, with tool form A, Aw B, Bw, C DIN 1840.

      • fully enclosed gearbox with all moving parts running in oil bath
      • quick adjustment for chamfering
      • One pass grinding of roughing and finishing teeth, form C
      • individual motors with separated controls for machine indexing and grinding wheel spindle
      • electronically adjustable indexing speed from 50 – 220 teeth/min
      • two grinding wheel spindle speeds:
      • ability to grind flat and highly curved teeth

Additional Accessories

      • fully re-circulating coolant system with splash guard (ONLY for model Control KS)
      • automatic saw blade infeed
      • attachment for grinding of bandsaw blades
      • attachment for grinding of hacksaw blades
    • clamping features for saw blades diameter 20-40, 30-70, up to 550mm

Technical Parameters

Type Grinding wheel diameter

(mm)

Saw blade diameter (mm) Max. tooth pitch

(mm)

Max. tooth depth

(mm)

Max. saw blade thickness

(mm)

Control 150 65-400 24 15 6
Control KS 150 65-400 24 15 6
Type Dimension

(LxWxH) mm

Spindle Speed

rpm

Phase Weight

kg

Control 760 x 1010 x 1300 4200/5800 3 155
Control KS 800 x 1240 x 1350 4200/5800 3 175

Standard Grinding

This type of grinding machine is designed and manufactured to the highest standards using only high quality materials. These machines are supplied with heavy duty motors which enable the machines to be used continuously without burn out.

      • meet all demands for quality, safety and reliability
      • wheel arbors mounted in dust proof sealed ball bearings
      • low noise level, both mechanical and electrical
      • adjustable spark arresters and eyeshields are supplied as standard equipment
      • can be supplied for both bench and pedestal mounting

Additional Accessories

      • drill grinding for 4 – 30mm
      • drill grinding for 30 – 60 mm
      • drill grinding for 4 – 60 mm
      • dust exhaust unit
      • overload protection
      • no-volt protection
      • wire brush

Technical Parameters

Type Grinding wheel size

mm

Grit Dimension

(LxWxH) mm

Speed

rpm

Spindle

Motor

Hp (kW)

Phase Weight

kg

PSD 5 200x38x20 30/60 620 x 290 x 400 2800 1.0 3 32
PSD 10 300x50x32 24/46 900 x 410 x 500 1400/2800 2.3/3.0 3 100
PSD 200 200x32x20 30/60 620 x 290 x 400 2800 1.0 3 32
Slibette 6NE 150x25x13 36/60 500 x 230 x 250 2800 (0.48) 1 12
Slibette 6N 150x25x13 36/60 500 x 230 x 250 2800 (0.56) 3 12
Slibette 8NE 200x30x20 30/60 500 x 280 x 270 2800 (0.75) 1 22
Slibette 8N 200x30x20 30/60 500 x 280 x 270 2800 (0.83) 3 22

Surface Grinding

This is a Tangential Surface grinding machine to produce a smooth finish on flat surfaces.

      • M – manual x, y and z movements

Sliding over flat and prism

      • R – manual x, y and z movements

Sliding over high precision THK rollers

      • H – hydraulic x movement, y and z manual

Sliding over flat and prism

      • 2H – hydraulic x movement, y hydraulic/mechanic and z manual

Sliding over flat and prism

      • 3E – 3 axis PLC driven, hrydraulic x movement, y by motor and z by step motor

Sliding over flat and prism

Optional Accessories

      • Magnetic plates
      • Grinding wheel former
      • Cylindrical punch grinder
      • Demagnetizer
      • Cooling equipment
      • Machine lamp
      • Swivel vise
      • Handwheel for longitudinal movement
      • Swivel vise

Technical Parameters

Model   Grinding wheel diameter

(mm)

“X” Longitudinal Travel   (mm) “Y”                   Cross Travel

(mm)

“Z”        Vertical Travel

(mm)

Motor

Hp  kW

Spindle Speed    (rpm) Volt Weight     (kg)
220×115 M Ø150x Ø25×10 220 115 285 0.5   0.38 3750 400 150
R 150
H 200
2H 220
320×190 R Ø180x Ø32×16 320 190 270 1.0   0.75 3000 400 230
H 280
2H 300
3E 350
400×190 R Ø180x Ø32×16 400 190 270 1.0   0.75 3000 400 230
H 280
2H 300
3E 350

Universal Tool and Cutter Grinding

This is a Universal tool & cutter grinding machine for grinding various tools like drills, milling cutters, turning tools and etc.

      • semi-auto universal machine for straight and helical grinding
      • for tools under 12” diameter and 14” length
      • precision workhead with multiple pivot points, MT4 Taper, 24T index plate  and fine rake angle adjustment
      • grinding motor rotates 360 degrees
      • table rides smoothly on hardened and ground cross roller bearings
      • adjustable travel limit switches improve efficiency
      • heavy flood coolant system with external baffle tank

Additional Accessories

      • Attachment for grinding chains
      • Attachment for grinding circular saws
      • Attachment for grinding boring bits
      • Attachment for grinding chisels and claw tools
      • Attachment for grinding planning, planner knives and full cutterheads
      • Variable wheel speed via Electronic speed variator – for grinding router bits with CBN wheels
    • Feed finger rest for grinding O.D. of helical tools

Technical Parameters

Model Grinding wheel diameter

(mm)

Grinding wheel bore (mm) Max. Table Travel

(mm)

Max. tooth Diameter

(mm)

Grinding Motor HP Voltage Weight     (kg)
LC 25-S 150 20 200 250 1 400 275
LC 35-S 150 20 350 300 1 400 550