Circular Sawing

This type of small sawing machine is designed for cutting metal. Can be used as a bench model or mounted on steel base and cuts from 45° right up to 45° left.

    • Bronze gear and case-hardened/grounded worm screw which work immersed in oil.
    • Electric submerged pump at 24V for lubrication and cooling of the blade.
    • Adjustable cut to measure stop to make cuts of the same length.
    • All machines are in conformity with CE regulations

Technical Parameters    

Model 225 250 275
Capacity at 90°   (mm) 65 70 90
60×60 60×60 80×80
90×50 110×60
Capacity at 45° left  (mm) 55 65 90
50×50 55×55 70×70
70×45 80×65
Capacity at 45° right  (mm) 60 80
55×55 70×70
65×45 70×70
Single Phase Main motor (kW) 0.7 0.7 1.8
Blade speed (m/min) 50 45 80
Three Phase Main motor (kW) 1.1 / 1.5 1.5 / 1.8
Blade speed (m/min) 45 / 90 40 / 80
Blade Dimension (mm) 225x32x1.9 250x32x2.0 300x32x2.5
Net Weight (kg) 38 80 130

Horizontal Bandsaw

This type of bandsawing machine is designed for mitre cuts to both sides with turntable, hydraulic sawbow feed, mitres to both sides up to 45° + 30° to one side. Sawbow STOP after lifting.

    • Saw blade is protected up to cutting point.
    • Quick and easy band change
    • Auto hydraulic shuttle dual vice system
    • Variable speed system
    • Linear scale for feeding.
    • Inverter’s blade speed adjusting device and PLC control system can be programmed for multiple action
    • Electric coolant pump
    • Removable chip box
    • Band tension indicator
    • All machines are in conformity with prevailing VDE and CE regulations

Technical Parameters     M – Manual    ,     HA – Semi-Automatic

Model W260HA W331HA W400HA W440HA W260M W331M
Capacity at 90°   (mm) 260      260×260 410×200 330      330×330  590×250 400      400×400 410×400 440      440×440 440×440 260      260×260 410×200 330      330×330  590×250
Capacity at 45°   (mm) 155     155×155   155×220 250      220×220 245×210 300      280×280  330×250
Bundle capacity  (mm)
Sawband speed (m/min) 17-106 17-106 20-120 15-110 17-106 17-110
Saw motor (kW) 1.5 1.5 4.0 5.5 1.1 1.5
Coolant pump (kW) 0.09 0.09 0.15 0.15 0.09 0.09
Hydraulic motor (kW) 0.25 0.25 0.75 0.75
Chip brush (kW)
Material support height (mm) 740 750 800 800 740 750
Sawband Dimension (mm) 3660x27x0.9 4120x27x0.9 4570x34x1.1 4900x34x1.1 3660x27x0.9 4120x27x0.9
Dimension L x W x H (mm) 1950 /950 /1200 2100 /950 /1250 1300 /2340 /1650 1300 /2400 /1690 1900 /750 /1220 2100 /750 /1250
Net Weight (kg) 400 460 1300 1400 360 440

Power Hacksaw

This type of sawing machine is designed for cutting numerous material such as wood and metal.

    • Adjustable cutting pressure.
    • Three cutting speed
    • Gears immersed in oil bath
    • All moving parts provided with bearings
    • Adjustable vice from 0° to 45°.
    • Rapid sawbow elevation
    • Independent motor pump cooling system
    • Automatic stop at the end of the cut
    • All machines are in conformity with CE regulations

Technical Parameters    

Model SH 250 SH 300
Capacity at 90°   (mm) 250 300
250×250 280×300
Capacity at 45°   (mm) 175 210
175×250 190×300
Blade speed (m/min) 12 – 20 – 32 12 – 20
Main motor (kW) 1.5 1.5
Material support height (mm) 582 582
Blade Dimension (mm) 400x32x2.0 500x40x2.5
Dimension L x W x H (mm) 1430 x 845 x 1100 1500 x 845 x 1200
Net Weight (kg) 350 385

Vertical Bandsaw

This type of bandsawing machine is designed for universal applications in the engineering industry. For cutting of almost all kinds of materials such as steel, cast iron, light and non-ferrous metals, plastics, graphite and even difficult to cut materials as well as friction cutting of thin sheet metals of steel or stainless steel.

      • Infinitely variable sawband spped range controlled by incorporated speedometer or via potentiometer with scale in operating panel.
      • Bandsaw wheels executed as disc shaped flanged wheels , easy to exchange
      • Running surface covered by plastic lining (90 Shore Hardness)
      • Manually adjustable sawband tension with band tension indicator
      • Sliding tables with manual, electrical or hydraulical feed are available.
      • The sawband is guided above and underneath the table. The upper guide is adjustable in height via handwheel for taking advantage of the maximum cutting height. A hydraulic height regulation is standard feature (except for ASH 10)
    • All machines are in conformity with prevailing VDE and CE regulations

Technical Parameters

Model BS40 MSU4 MSU5 AS6 AS8 ASH9 AS10 ASH10 ASH15
Wheel Diameter   (mm) 420 420 500 630 800 900 3×420 3×500 3×630
Cutting height under guide (mm) 475 450 450 450 450 520 400 400 680
Throat depth  (mm) 400 405 485 610 780 880 1010 1010 1050
Sawband speed (m/min) 1500 16-2200 18-2000 15-1600 13-2900 16-3200 15-1600 13-2500 16-3200
Saw motor (kW) 1.5 2.2 2.2 2.2 5.5 7.5 2.2 4.0/6.0 7.5
Table size w/o rear table (mm) 615×615 615×615 615×615 660×660 750×800 750×950 660×660 750×800 950x 1200
Table movement/stroke (mm) Man/260 Man/330 Hyd/410 Man/260 Hyd/330 650
Table Load (kg) 300 300 300 350 400 700 350 400 700
Rear Table (mm) 265×400 345×500 470×500 500×500 500×500 850×550
Tiltable 15°/45° 15°/45° 15°/45° 15°/45° 15°/30° 15°/45°
Material support height (mm) 950 950 950 950 950 950 950 950 950
Sawband Dimension min/max (mm) 3600/ 3800 3450/ 3640 3900/ 4090 4435/ 4650 5500/ 5700 5960/ 6160 4740/ 4840 5170/ 5300 7050/ 7150
Sawband width max. (mm) 20 20 20 20 34 34 20 20 34
Dimension L x W x H (mm) 1250 /1000 /2100 1250 /1000 /2100 1250 /1000 /2290 1500 /1250 /2360 1800 /1530 /2650 2075 /1950 /2860 1900 /1250 /2150 2100 /1350 /2270 3000 /1580 /2700
Net Weight (kg) 470 470 490 900 1240 1900 1040 1200 2500