Bogie Hearth

This type of bogie hearth chamber furnace is designed for all ceramic and glass technologies where a very precise temperature distribution and dynamic progress of temperature curve are required, for controlled cooling with limited change of opening the furnace on temperature.

        • Max. temperature of 1280°C and 1340°C
        • Door opening sideways
        • Heating placed on wall surfaces and bogie
        • Optimum temp. uniformity DIN 17052-1
        • Manually controlled ventilation flap
        • Bogie spirals covered with SiC plates
        • According to CE standard
TypeTmax
°C
Capacity
litre
Int dimension
(wxhxd) mm
Ext dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
1000/12128011701000x900x13002250x2000x2350454001500
1500/12128015001000x1000x15002250x2100x2550704001800
2000/12128020001000x1000x20002250x2100x3100954002200
3000/12128030251100x1100x25002400x2200x36001304002500
5000/12128050801100x1400x33002400x2500x44001604003200
7000/12128070841100x1400x46002400x2500x58001954004000
1000/13134011701000x900x13002250x2000x2350654001500
1500/13134015001000x1000x15002250x2100x2550954001800
2000/13 134020001000x1000x20002250x2100x31001154002200
3000/13134030251100x1100x25002400x2200x36001604002500
5000/13134050801100x1400x33002400x2500x44002004003200
7000/13134070841100x1400x46002400x2500x58002654004000

Chamber Furnace

These chamber furnaces are designed for ceramic and glass technologies with special intention on temperature growth and decline. Also on exactness of temperature distribution with controlled cooling. Especially for decorative and industrial ceramic and porcelain firing,  glass pan tempering, glass aftercooling, heating, aftercooling for stress elimination, décor firing, glass fritting and production of plastic melting.

      • Max. temperature of 1400°C
      • Limit unit
      • Ventilation of external jacket
      • preventing from vapour
      • lowering jacket temperature
      • Ventilation flue for models of 50 – 300 litres
      • Manual controlled ventilation flap for models of 500 – 2000 litres
      • Aeration flue in the furnace bottom
      • Optimum temp. uniformity DIN 17052-1
      • Manual door opening to the left
      • Bottom covered with SiC plates
      • According to CE standard
TypeTmax
°C
Capacity
litre
Int dimension
(wxhxd) mm
Power kWVoltage
Volt
Weight
kg
50 /12/131200/130050350x350x4003.5/ 5.5230/400125
70 /12/131200/130070350x450x4506.5/ 7.5 400165
120 /12/13/141280/1340/1400120450x530x5009.0/ 10.5/ 10.5400260
150 /12/13/141280/1340/1400150450x600x53010.5/ 15.0/ 15.0400320
200 /12/13/141280/1340/1400200500x750x53015.0/ 20.0/ 20.0400360
250 /12/13/141280/1340/1400250520x800x55015.0/ 20.0/ 20.0400420
300 /12/13/141280/1340/1400300560x800x71020.0/ 27.0/ 27.0400480
500 /12/13/141280/1340/1400500650x1000x75030.0/ 40.0/ 40.0400770
700 /12/13/141280/1340/1400700750x1100x90045.0/ 60.0/ 60.0400990
1000 /12/13/141280/1340/14001000800x1200x100055.0/ 75.0/ 75.04002300
1500 /12/13/141280/1340/14001500950x1350x120075.0/ 110.0/ 110.04002950
2000 /12/13/141280/1340/140020001000x1500x1400105.0/ 130.0/ 130.04003300

Gradient Kilns

These furnaces are suitable for acceleration of all tests mostly in industrial, ceramic,  glass and other laboratories. The temperature fall enables to inset more samples and check their after fired structure in furnace. They are used especially for fritting tests, calcinations, softening and sintering point setting, ceramics and enamel firing tests.

      • Max. temperature of 1300°C
      • One driving zone with additional 4 zones
      • Top insulation material
      • Low power consumption
      • Rapid approach to required temperature
      • Heating coils placed inside of lining grooves
      • Manual opened lid with handrails
      • Lid insulation of mineral grain
      • Optimum temp. uniformity DIN 17052-1
      • According to CE standard
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
30 /131300301700x1200x5001400×1407.0400240

Hobby Furnaces

These chamber furnaces are designed for ceramic and glass technologies with special intention on temperature growth and decline. Also on exactness of temperature distribution with controlled cooling. Especially for decorative and industrial ceramic and porcelain firing,  glass pan tempering, glass aftercooling, heating, aftercooling for stress elimination, décor firing, glass fritting and production of plastic melting.

      • Max. temperature of 1280°C
      • Manual ventilation in the bottom
      • Ventilation of external jacket
      • preventing from vapour
      • lowering jacket temperature
      • Heating coils placed inside of lining grooves
      • Manual door opening to the left
      • Door with secure switch
      • Optimum temp. uniformity DIN 17052-1
      • Stand
      • Bottom covered with SiC plates
      • According to CE standard
Technical Parameters
TypeTmax
°C
Capacity
litre
Ext dimension
(wxhxd) mm
Int dimension
(wxhxd) mm
Power
kW
Voltage
Volt
Weight
kg
50 /11110080715x1365x870350x350x346 3.523095
90 /12128090840x1400x900450x410x5057.0 400125
120 /121280120840x1450x955450x500x550 9.0400165
190 /121280190970x1580x955550x590x55012.0400230

Top Loading

This type of furnaces are suitable for ceramics hobby groups and professional ceramists for firing of ceramics, stoneware, glass and china ornaments, glass fusing, firing and glaze tests.

      • Max. temperature of 1280°C
      • Jacket made of high-grade stainless steel sheet
      • Stable lid suspension.
      • Optimum temp. uniformity of + 5K in accordance to DIN 17052-1
      • Cover plug for ventilation hole
TypeTmax
°C
Capacity
litre
Int dimension
(Ø x h) mm
Ext dimension
(Ø x h) mm
Power
kW
Voltage
Volt
Weight
kg
30/12 1280 30350 x 345556 x 5813.523038
45/12 1280 45410 x 345601 x 5813.523055
60/12 1280 60410 x 455601 x 695 5.540065
100/12 1280 100525 x 455743 x 6657.540080
125/12 1280125620 x 455815 x 6658.540098
200/12 1280200620 x 685817 x 89711.0400120